The iJoy RDTA 5S is the sixth generation model of iJoy's impressive RDTA line-up, retaining the innovative central top-fill design and two-post, dual terminal build deck while upgrading the airflow control system and the entire chassis. With most of the design elements inspired from the iJoy RDTA 5, the RDTA 5S measures 24mm in diameter in a compact structure with 2.6mL juice reservoir. The RDTA 5S is refilled through the central fill-port that leads directly into the glass reservoir, accessed via removing the top cap. An update is implemented within the two-post, dual terminal design, featuring a gold-plated build deck for effective conductivity. It works in synergy with the gold-plated 510 connection ensures great connection, with spacious chamber clearance for high-power configurations. The terminal openings are secured via side and top mounted Phillips screws for larger thread points and more secure attachment. The wicking assembly deploys a convenient access, in which users can unthread the mid-section of the tank to access into the reservoir and set-up the coil leads and wicking materials. Airflow is highly dynamic on the iJoy RDTA 5, implementing a dual airflow system for a truly versatile experience. The primary bottom airflow enters the chamber through dual exterior airslots that feeds into two internal air tubes. The secondary airflow features a wide slotted airflow on each side of the chassis, throttled via the knurled top cap.. A creation that tailors towards advanced users with functionalities that caters to amateurs, the iJoy RDTA 5S is a worthy flagship product.
iJoy RDTA 5S Features:
2.6mL Juice Capacity
Superior Stainless Steel Construction
Pyrex Glass Reinforcement
Two-Post, Dual Terminal Deck
2.5mm Diameter Terminal Posts
Top and Side Secured via Hardened Screws
Deckmilled Negative Post
PEEK-Insulated Positive Post
Convenient Central Refill Port
Dynamic Dual Airflow System
Bottom Airflow Control - Dual Wide Airslots
Side Airflow Control - Dual Wide Airslots
ULTEM Widebore Drip Tip
Adjustable Gold-Plated 510 Connection
This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.
Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.
We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices, and batteries. Coils with low resistance are not suitable with all mods, devices, and batteries. Please make sure that your mods, devices, and batteries can handle low resistance before using them.
Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. Vapeify.us and any of Vapeify.us’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.
Vapeify.us and any or all of Vapeify.us’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.
When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge of all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment.
Check It See More Details atmizoo vapesnail v2 replacement tank tube Description:
Atmizoo VapeSnail V2 Replacement AFC Tube Kit includes 4 types of fixed airflow tubes to replace the pre-installed one with a diameter of 4.0mm for both Click Here Click Here MTL and DL tastes and 4 MTL pins for a strengthened one, all of them contributing to enriching your vaping experience when vaping with the Atmizoo VapeSnail V2 Style RTA.
Click Here Click Here Click Here Atmizoo VapeSnail V2 Style RTA for Billet / Boro Box Mod Click Here
Material: 316 stainless steel
Diameters of 4 Fixed AFC Tubes: 2.0 / 2.5 / 3.0 / 3.5mm
Diameters of 4 MTL Air Flow Pins AFC Tubes: 1.0 / 1.2 / 1.5 / 1.8mm
Package Size: 5 x 4 x 2cm
Package Weight: 0.08kg
8 x AFC Tube